Laboratory Instrument

Digital Tablet Dissolution Test Apparatus

Features:

  • Designed to carry out dissolution rate of tables and capsules as per USP standard
  • The unit consist of constant temperature water bath made of transparent acrylic having immersion water heater to achieve require temperature
  • The round bottom flask is placed inside the bath the flask has acrylic lid which allows to pass tiring shaft
  • The stirring is being performed by electronically controlled motor with accuracy of 1 RPM with variable range of 25 to 170 RPM with digital RPM indicator
  • Control housing, lifting housing and framing made of 316 S.S in GMP model
  • The temperature is being controlled by solid state electronic temperature controller with digital indicator & PT 100 as a sensor
  • The unit consist with presentable digital timer to set from 1 minute to 23 hour
  • Basket assembly and stirring paddle are made from 316 quality stainless steel
  • Selection of single test three test or six test unit.
  • Operates on 230 volts

Kjedhal Digestion Unit

We are manufacturer, supplier and exporter for Kjedhal Digestion Unit. Kjedhal Digestion Unit, "SSGW", Complete with heating box and fume duct. The 500 watts heaters 6 inches apart having individual on/off switches and energy regulator. The height of the side stand with clamp's provided, is adjustable to accommodate kjeldhal flask of 300 ml., 500ml or 800ml, without glass parts but with fume duct.

Kjeldahl Assembly Heater

    Features:

    • Advance design structure of M.S pipes with epoxy powder coating finish
    • Heating box made of M.S/G.I duly finished in powder coated shade
    • Control panel separately attached to the main housing
    • Open type spiral heater fitted in porcelain plates
    • Condenser rack made of brass- chrome- plated provided for circulation of water of condenser
    • Energy regulator as a temp. controller
    • Suitable for 500ml and 800ml cap. kjeldahl flask
    • Operator of 230 volts

    Technical Specifications:

    Cat. No.

    Capacity

    Flask recesses

    Temp. controller

    Watts

    SSE -23/A

    250 MI/800 MI

    4

    Energy Regulator

    1000

    SSE -23/B

    250 MI/800 MI

    6

    Energy Regulator

    1500

    Rotary Vacuum Flash Evaporator

    Specification:

    Rotary Vacuum Evaporator is supplied complete with geared drive non sparkling noiseless motor offering smooth speed control by analog knob up to 200 RPM, Jack arrangement is fitted on tapered front base for positioning glass assembly. Double walled water bath Thermostatic temperature controller, double coil glass condenser (inclined) with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800ml, receiver flask capacity one litre fitted with a ball joint, feeding tube, vapour path tub, provided with a seal, clips & spring a complete working unit.

    Laminar Air Flow

    We offer Laminar Air Flow system that is specially designed and developed to be used in operating rooms and operation theaters. It works on popular and reliable method for filtration of particles and other contaminants from the air, which are harmful and could be decisive. Our laminar air flow system efficiently filters dust particles up to 0.3 microns and also eliminate microorganisms by killing them during the filtration process through U.V. radiation and electrostatic precipitation.

    Dry Heat Sterilizer

    Features:

    • Dry Heat Sterilizer Class 100
    • Specially designed for sterilizing ampoules, vials and bottles
    • Microprocessor based programmable temperature controller
    • Round corner 316L stainless steel chamber and exterior 304 S.S Matt finish
    • Heap filters at air intake, exhaust and re- circulation air flow to ensure a class 100 environment
    • Effective door sealing by food grade silicone gasket
    • RS- 232/ RS 248 port for computer interface data storing and documentation procedures
    • Independent safety temperature controller to protect the process in case main control fails
    • Temp. range: 5c above ambient to 200c

    Plasma Freezers

    Features:

    • Specially designed for blood component storage
    • High impact epoxy coating S.S interior and G.I exterior finished in powder coating shade in regular Model
    • Preset - 30c temperature or - 70c temperature with audible alarm switch and visual alarmindicator
    • Highly density white wool and PUF insulation protects the cabinet from ambient temperature
    • Hermetically sealed compressor fan cooled condenser in all models and cascade cooling system for - 70c model & CFC free cooling system
    • Complete S.S having 316L S.S chamber and exterior also 316 S.S matt finish
    • Stainless steel drawers or rack for plasma bags/ boxes and red cell canisters, for better access to inventory
    • Optional temperature chart recorder or PID controller with printer output
    • Selection of chest type model or upright mode

    Block Digestion System

    Features:

    • Designed for all wet digestion and oxidation techniques such as kjeldhal nitrogen determination, chemical oxidation demand (COD) procedures, metal determination the preparation of sample
    • Prior to analysis and many more application
    • A clean dry controlled method of heating
    • Solid state electronic temperature controller with digital indicator and PT- 100 as a sensor
    • Special refractory type heaters for excellent uniform heating
    • Interior block sitting made of stainless steel exterior of G.I epoxy powder coated finish
    • Selection of model for kjedhahl digestion test COD test and oxidation test

    Chromatography Low Temperature Cabinet

    Features:

    • Designed to meet all chromatography instrumentation needs
    • Stable below ambient temperature for life science and laboratory application
    • Stainless steel interior and exterior epoxy powder coated finish
    • Electronic temp. controller with digital temperature display having resolution with in 0.1 c
    • Self closing double two pane glass doors swinging lockable
    • Two vapor proof duplex outlets one continuous on and one switched from control panel
    • Removable interior shelves
    • Two access ports with hinged covers
    • Independent power switched for interior outlets and interior lights

    Bulk Density Apparatus Densitometer

    Features:

    • Bulk Density Apparatus (Densitometer)
    • This apparatus is designed to study the packing down of powder beds of different pharmaceuticals & chemical powders
    • Most useful in the field of tablet manufacturing, capsules filling and cosmetics manufacturing
    • The housing made of M.S /GI. Sheet duly finishes in epoxy powder coated shade in regular Model
    • Microprocessor based stroke setting and stroke can be read don digital display
    • The housing and holders made of 326L in GMP Model
    • No. of strokes can adjusted between 1 to 999 strokes
    • Suitable for 2 cylinder of 50 ml or 1000 ml

    Friability Test Apparatus

    Features:

    • This Friability Test Apparatus is specially designed to determine the durability of tables form the time of use
    • Microprocessor based preset DIGITAL controller
    • The rate of abrasion impact hardness of table can be found using this unit
    • A transparent 12” dia acrylic drum having blade carries the table along it up to a predetermined high and let them slide off
    • Descent compact epoxy powder coated housing in regular model
    • Housing made of 316 S.S matt finish in GMP MODEL
    • The tables are weighted before and after the rubbing in the drum and the difference in the weight indicates the rate of abrasion
    • The desired duration of rotation can be fixed by using timer which is in built with the pane
    • lThe drum rotation at constant speed of 25 RPM
    • Operates on 230 volts

    Antibiotic Zone Reader

    Features:

    • This is very compact and designed for measuring the diameter of finished zone in petri dish for determining the strength of antibiotic materials
    • Unit made of stainless steel 316L in GMP Model
    • This antibiotic zone reader measure the diameter of the inhibited zone within the range of 0to 35mm with accuracy of 0.2mm
    • The light from inside source of the base passes up through the transparent and semitransparent of the agar then to a refracting mirror situated in an arm above the unit
    • The mirror reflects the light to a glass prism mounted at the magnified image of the zone of in habitations is clearly visible on the prism

    Basket Centrifuge

    Features:

    • This is specially designed centrifuge for the accelerated separation on laboratory scale
    • A separation is being effected by filtration through filter paper or cloth
    • Separation is accomplished by means of S.S perforated basket rotating within an enclosed S.S vessel which receives emergent liquid and drain it through outlet nipple
    • Draining chamber and basket made of 304 S.S and exterior of M.S/G.I sheet duly finish in powder coated shade
    • The speed is controlled by speed regulator with digital timer

    Block Heater

    Features:

    • Specially designed for many clinical test performed in laboratories including blood test inactivation of culture, incubators enzyme analysis melting and boiling point determination, wet ashing sample concentration catalyst digestion digestion and many more application
    • Highly insulated chamber provide uniform and efficient heat transfer to test tubes
    • Exterior body made of G.I finished in blue powder coated shade
    • Block made of aluminum alloy for excellent uniform temperature
    • With solid state electronic temp. controller with digital indicator & PT 100 as a sensor
    • Temp. Range: 5c above ambient to 250c
    • Temp. Accuracy: ±1c

    Low Temperature Cabinet

    Features:

    • Low Temperature Cabinet (Upright Model)
    • Designed and constructed to meet temperature storage store needs of all modern laboratory
    • Built to meet the highest standard of performance and quality
    • Heavy gauge stainless steel interior and exterior durable high impact epoxy powder coating finish to resist rusting
    • Two in depended door with gasket up to model - 20 c for perfect sealing to eliminate frost built up
    • Minimum 3” PUF insulation in all models
    • Five compartment having individual insulation inner doors in model of -40c 7- 70 c to minimize cold air loss.
    • Heavy duty, hermetically sealed CFC free cooling system
    • The temperature is being controlled by solid state electronic temperature controller with digital indicator
    • Low profile, heavy duty casters for mobility and key lock door for security

    Lyophiliser Freeze Dryer

    We provide a wide variety of Laboratory equipments like Lyophiliser Freeze Dryer,its features are as follows:

    Features:


    • Freeze Dryer (Lyophiliser)
    • Most ideal for lyophilizing in serum bottles vials and ampoules or other small glassware
    • Chamber made of 316 stainless steel and outer made of G.I sheets duly powder coated finish
    • Equipped with a mechanically cooling system for condenser temperature (-50 c or -80 c)
    • Vacuum gauge read from 1” to30” hg
    • Solid state temperature controller with dual digital displays for set and condenser temperature
    • Selection of model with drum type manifolds, with vertical type manifold or straight type manifold
    • Selection of capacity 3 It, 6 It and chambers drying
    • Stainless steel manifolds are designed to provide maximum vapour flow and convenient access to all parts. Each ¾ port having quick seal valve for attaching variety of flask.
    • With suitable vacuum pump

    Tissue Culture Rotator

    Features:

    • Most useful for tissue growth hormone production and cytotoxic assays
    • This newly designed tissue culture rotators provides variable speed and angle
    • Solid state speed controller regulates rotor up to 70 RPM
    • Angle of drum adjustable up to 90 degree horizontally Housing made of stainless steel epoxy powder coated
    • Drum made of S.S/acrylic
    • Operates on 230 volts

    Automatic Pipette Washer

    Features:

    • This unit has a large capacity of washing pipettes very useful for serological, bacteriological or clinical laboratories
    • Designed based on a siphoned principle
    • Complete unit made of stainless steel
    • Washing cylinder of size: 221/2” ht X6” dia removable pipette holder of 5 ½” dia
    • The holder can accommodate pipettes up to 375 mm in length
    • Selection of cool wash & heat wash

    Slide Warming Table

    Features:

    • Ideal for drying slides and melting of paraffin
    • Consisting of 2 sections a heating zone of 12” X 4” and cold zone of 4”X 4”
    • Base and lid made of M.S/G.I with epoxy powder coated shade
    • A mica covered heater provides uniform heating throughout heating zone
    • Selection of temperature control energy regulator or solid state digital controller
    • Operates on 230 volts A.C

    COD Digester

    Features:

    • Selection of model 15 tubes or 24 specially designed COD digester for COD method for monitoring waste water in fluent and industrial process water
    • Highly insulated double walled inner chamber of 304 S.S & exterior G.I powder coated finish.
    • The temperature is being control by solid state electronic temp. controller with DIGITAL indicator & pt-100 as a sensor
    • Digital timer of 120 minute with alarm tubes or 36 tubes
    • Suitable for 38 mm dia tubes and 600 mm height air condenser
    • Temp accuracy: ±0.5c

    Rectangular Hot Plate

    Features:

    • Plates are in rectangular shape
    • Top plate over hangs by supporting M.S. pillars allows air insulation between plate and control compartment to keep control compartment cool
    • Long lasting nichrome elements
    • Body made of thick mild steel/G.I sheet duly finishing in epoxy power coated shade in Regular Model
    • Body made of stainless - steel & plate also made of S.S in GMP Model
    • With energy regulator and three heat control switch
    • Max. Surface temperature: 300c
    • Operates on 230 volts A.C.

    Hot Plate Round

    Features:

    • Round shape plate
    • Top plate over hangs by supporting m.s. pillars witch ensures air insulation between plate and control compartment keeping control compartment cool
    • Body made of thick mild steel /G.I. sheet duly finished in epoxy power coated shade in regular Model
    • Body made of stainless steel & plate also made of S.S in GMP Model
    • With energy regulator and three heat control switch
    • Max. Surface temperature: -300c
    • Operates on 230 volts A.C

    Lab Dry Heat Sterilizer

    Specifications:

    • Specially designed for sterilizing ampoules, vials and bottles.
    • Microprocessor based programmable temperature controller
    • Round corner 316L stainless steel chamber and exterior 304 S.S matt finish
    • Heap filters at air intake, exhaust and re- circulation air flow to ensure a class – 100 environment
    • Effective door sealing by food grade silicone gasket
    • RS- 232/ RS 248 port for computer interface data storing and documentation procedures
    • Independent safety temperature controller to protect the process in case main control fails

    Upright Freezers

    Ideally designed for storage of storage of  blood components, serum, vaccines and medicines.

    Features:

    • Double walled inner S.S 304 and exterior G.I epoxy powder coated finish
    • 4”puf insulation to minimize heat – exchange
    • Interior 316L S.S and exterior 304 S.S matt finish in GMP model
    • Recessed adjustable temperature control and digital display
    • Cooling kit insulation hermetically sealed compressor, fan- motor, condenser CFC free system
    • Highly insulated front opening door with silicone gasket having losable handle
    • S.S wire mesh shelves and S.S lockable drawers in different model


    Technical Specifications:

    Cat. No. 

    Inner size (LXWXHT)

    Capacity

    Temp. Range

    SSE -37/ A

    20”X18”X32”

    6 CFT/170 LTR.

    -0C TO -20C

    SSE -37/B

    24”X22”X36”

    10 CFT/290 LTR

    -0C TO -20C

    SSE -37/ C

    32”X24”X38”

    17 CFT/480 LTR

    -0C TO -20C

    SSE -37/D

    20”X18”X32”

    6 CFT/170 LTR

    -10C TO -50C

    SSE -37/ E

    24”X22”36”

    10 CFT/290 LTR

    -10C TO -50C

    SSE -37/F

    32”X24”38”

    17 CFT/480 LTR

    -10C TO -50C

    SSE -37/ G

    20”X18”X32”

    6 CFT/170 LTR

    -30C TO -70C

    SSE -37/H

    24”X22”X36”

    10 CFT/290 LTR

    -30C TO -70C

    SSE -37/i

    32”X24”X38”

    17 CFT/480 LTR

    -30C TO -70C

    V.D.R.L. Rotator

    Features:

    • Most useful for standard serological test including V.D.R.L test
    • Sturdy heavy based housing finish with epoxy powder coated shade
    • Single speed 30 RPM
    • With DIGITAL to choose time from 1 to 15 minute
    • Single speed model
    • Usable with flat bottom flask, beaker and disc

    Technical Specifications:

    Cat. No.

    Size Platform

    Model

    Orbit

    Timer range

    Volts

    SSE-27/A

    12”LX12”WX1\2 HT

    Regular

    20 MM

    99 minute

    230 Volts

    SSE-27/B

    12”LX12”WX1\2 HT

    Digital

    20 MM

    99 minute

    230 Volts

    Steam Sterilizer

    We offer vertical Steam Sterilizer that is made out of total medical grade stainless steel (16 gauge) and all part also made of S.S and top lid is die pressed tick solid S.S plate and polished for the elegant appearance. Equipped with steam release and drain cock. Specially designed heat resistant gasket. New type of element of 3 kw is covered by same metal removable cover to protect against electric shock. The Steam sterilizer with automatic controls and safeguards to manage daily sterilization in the hospital along with saving of electricity. The Steam sterilizer is equipment with low water level cut off system. When water level falls down the equipments get automatic cut power supply to protect the elements from bumming out dry.

    Lab Digital Colony Counter

    We have in stores Lab Digital Colony Counter for our esteemed clients. These products are used for safety purposes. The offered products are developed using superior quality steel and other required material along latest technology in line with the defined parameters of the industry.

    Features:

     

    • Easy to operate
    • High durability
    • High performance
    • Efficient
    • Precise design

     

    Specifications:

     

    • This unit is most useful for accurate counting and recording of bacterial and colonies
    • Usable in all laboratories – biology, pathology, zoology, bacteriology etc
    • Housing made of M.S / G.I sheet finished with epoxy powder coated shade – regular model
    • Body made of 316 S.S matt finish in GMP model
    • 4 digit resettable digital display to read and record counting
    • Illumination provided by cool tube light for clear view and perfect counting through magnifying glass provided
    • A probe (PEN) for marking as well as counting provided
    • With wolffhueged grid glass plate and a magnifying lens
    • Operates on 230 volts A.C

    Digital Floculator Jar Tester

    In order to meet the demands of our clients in an effective manner, we bring forth technically upgraded Digital Floculator (Jar Tester). These products are developed with utmost precision using top class raw-material and other components under the management of our prolific professionals. Conforming to the defined parameters of the industry, these products are featured with high durability and high performance.

     

    Features:

     

    • Low maintenance
    • High performance
    • Precise design
    • Compact shape
    • High durability

    Laboratory Glassware Dryer

    Features:

    • Specially designed for all type of glass ware drying
    • Triple walled in construction with inner made of 304 stainless steel & exterior G.I powder coated shade in regular model
    • Inner 316L S.S mirror finish and exterior also 304 S.S matt finish in GMP Model
    • Heating element clamped two sides for prefect drying no elements at bottom
    • Air circulation being performed by motorized blower
    • Selection of controller solid state DIGITAL controller or microprocessor PID controller with printer port


    Technical Specifications:

    Cat. No.

    Chamber Inner Size

    Capacity

    Temp. range

    SSE-41/A

    18”X18”X20”

    3.75 CFT/106 LTRS

    5c above ambient to

    200c

    SSE-41/B

    24”X24”X24”

    8 CFT/228 LTRS

    5c above ambient to

    200c

    SSE-41/C

    24”X24”X36”

    12 CFT/342 LTRS

    5c above ambient to

    200c

    SSE-41/D

    18”X18”X20”

    3.75 CFT/106 LTRS

    50c to 300c

    SSE-41/E

    24”X24”X24”

    8 CFT/228 LTRS

    50c to 300c

    SSE-41/F

    24”24”X36”

    12 CFT/342 LTRS

    50c to 300c

    Chest Type Freezers

    Features:

    • Specially designed for storing of serum, vaccines pharma samples & clinical samples
    • Rugged 304 stainless steel interior & exterior G.I epoxy powder coated finish in regular model
    • Interior 316LS.S and exterior 304 S.S matt finished in GMP Model
    • Adjustable temperature control with DIGITAL indicator
    • Cfc free cooling system includes hermetically sealed compressor, fan motor and condenser
    • PUF insulation for low energy consumption
    • Magnetic gasket seal ensures door sealing with adjustable hinges to open the door as per required height
    • Various sizes for selection


    Technical Specifications:

    Cat. NO.

    Inner size (LX W X D)

    Capacity

    Temp. Range

    SSE -36/A

    24”X18”X24”

    6 CFT/170 LTRS

    -20 C

    SSE -36/B

    30”X21”X28”

    10 CFT/290 LTRS

    -20 C

    SSE -36/C

    24”X18”X24”

    6 CFT/170 LTRS

    -50 C

    SSE -36/D

    30”X21”X28”

    10 CFT/290 LTRS

    -50 C

    SSE -36/E

    24”X18”X24”

    6 CFT/170 LTRS

    -70 C

    SSE -36/F

    30”X21”X28”

    10 CFT/290 LTRS

    -70 C

    Mantle Type Micro Kjedahl

      Features:

      • Most suitable designed for digestion process
      • M.S / G.I housing duly finished in epoxy powder coated shade
      • Fiber glass surface heating
      • Separately attached control panel prevent heat transfer to control system
      • Fume exhaust pipe made of S.S with holding clamps to drive away fumes
      • Available in 50ml and 100ml capacity for selection
      • Operates on 230 volts A.C.

      Technical Specifications:

      Cat. No. 

      Capacity Flask

      Temp. Controller

      SSE -22 /A

      50 ML CAP.

      Energy regulator

      SSE -22 /B

      100 ML CAP.

      Energy regulator

      Extraction Heater Soxhlet

        Features:

        • Quick surface heating save extraction time
        • Housing made of M.S/G.I sheet duly finished in epoxy powder coat shade
        • The control panel is separate from heating zone but in built with the main housing aluminum casted plate for quick and uniform heating
        • With adjustable cross rods and boss heads to fix up for condenser assembly
        • Selection of 4 flask unit or 6 flask unit
        • Operates on 230 volts A.C

        Technical Specifications:

        Cat. No.

        Size (LXWXH)

        Range

        Temp. Controller

        SSE -21/A

        28”X11”X8”

        4

        Energy regulator

        SSE -21/B

        37”X11”X8”

        6

        Energy regulator

        Rectangular Horizontal Sterilizer

        All contact parts is made of S.S 316 with food grade joints silicon gasket load in trolley and with doorsafety locks. When door is in under pressure and jacket is provided for storage of steam and boiler iselectric operated with heaters and digital temperature controlled and display pressure. Switch isprovided for controlling of pressure and safety .Valve is provided for complete stainless steel. Thesterilizer is based on the principle that microbiological action of saturated steam at elevated temp israpid and thorough. All models work on downward displacement of air principle which is mosteconomical method of obtaining for all types of bulk sterilization which are commonly needed inMedical, Agricultural and Pharmaceutical institute Suitable for sterilizing hospital dressings, linen,rubber plastic goods, surgical instruments, glassware’s and utensils etc. Construction Robust andrugged all weld construction which is leak proof unlike riveted construction. Inner chamber & Outerchamber is made of stainless steel of 304/316 quality and jacket is made out of rolled steel. Sterilizerswill have single door made out of rolled steel lined with S.S. sheet on both sides. All the sterilizers arehydraulically tested to withstand 2.5 times the working pressure. The steam jacket is lined on the outerside with asbestos sheet or glass wool which prevents heat losses due to radiation and is covered bystrong rolled steel sheet duly painted.Boiler Made of thick stainless steel plate suitably located under the sterilizer. High grade flanged typeheating elements are fitted from front side for easy replacement/repair. Fitted with water gauge glass forwater level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut offdevice. This device protects the heater in the generator from burning out dry. The steam pressure in theboiler is indicated on an individual pressureGauge. Safety Lock for Door Every horizontal rectangular sterilizer is fitted with SELF LOCKING SAFETY DOORwhich cannot be opened when the chamber is under pressure.The Chamber Two separate valves provided for evacuating air and steam from inner chamber and jacket as andwhen desired. A steam trap is fitted in the chamber discharge line to eliminate the condensate automatically. SwitchBox Houses the Pressure control switch, Main switch, Pilot lamps, relays etc. and mounted on the stand of thesterilizer for easy operation.

        Ultrasonic Bath

        Our firm is widely known for offering best products of Ultrasonic Bath which are finest in the industry. The materials needed in making the product are brought in from our well known vendors. Owing to its precision-engineering these products exhibit attributes such as long durability, resistance against corrosion and fine finish.

         

        Features:

         

        • Superior strength
        • No wear and tear
        • Stainless steel
        • Durable
        • Easy installation and operation
        • Superb fittings
        • High quality insulation
        • Available in various designs and shapes
        • Long lasting
        • Superb Efficiency

        Fume Hood

        FUME HOOD

        Specification:Fabricated out of thick wooden board. These are designed to throw-out all toxic/harmful vapors, this  protecting  costly  instruments  and  the  person  working  in  the  lab.  Outer  is  finished  with sunmica and inner epoxy painted. Working table top is made of Stainless Steel and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weight. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panelis fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220/230 volts AC supply.

        Working Size (wxdxh) Material Of Construction approx 3’x2’x2’ Stainless Steel 4’x2’x2’ Stainless Steel 4’x2 ½’ X2 ½’ Stainless Steel 3’x2’x2’ Mild Steel 4’x2’x2’ Mild Steel 4’x2 ½’ X2 ½’ Mild Steel 3’x2’x2’ Wooden 4’x2’x2’ Wooden 4’x2 ½’ X2 ½’ Wooden

        Tissue Culture Rack

        Tissue culture rack are very useful for various types of tissue culture plants and other tissue culture work in tissue culture room.

        Made By : Tissue rack are made of tubular mild steel pipes duly painted for longer life or made  

                           of aluminum.

        Racks : Each rack of size 48"x18" (depth) is covered with thick glass or sun mica paste dour  

                      board. Distance between each rack is 15".

        Lighting: Four fluorescent tubes are glare free lights are built in upper portion in worktable.

        UV Germicidal Light: Are fitted inside the rack.

        Chocks: All fluorescent tubes chocks and ultra violet germicidal tube chocks are fitted outside

                       of rack.

        Timer: 0-24 Hours Digital Timers are provided of tissue culture rack.

        Control Panels: All control panels are fitted tops of tissue culture racks. On/Off switch of

        fluorescent tubes and UV tubes. All control panels are fitted separately in each                                rack with indicator light.

        Easy Mobility: The whole rack is provided with four nos. castor wheels at the bottom for easy

                                    mobility to any place.

        Looking for Laboratory Instrument ?
        © Shamboo Scientific Glass Works
         
        Desktop Site Back to top