Laboratory Equipment

Rotary Vacuum Evaporator

We offer Rotary Vacuum Evaporator that has unit base made of thick M.S sheet coated with a layer of epoxy based polyester paint providing a scratch less & chemical resistant surface. General drive unit offers a smooth speed rotation precisely controlled with analog knobs. Double walled bath-seamless inner vessel SS 304 & outer AL, provided with high grade insulation to eluminate heat loss. Digital temperature indicator cum controller, temperature control from ambient plus 50 C to 1800 C.

Roto Fog Turntable

We are the Manufacturer and supplier of Foggers for hospitals, ULV Foggers in India and abroad.

Fogger is a liquid ULV fogger suited to the application of spraying water & oil based

liquids in fine particle form for disinfection, pest/germ/odour control applications etc.

The fogger runs on a high speed FHP Motor that provides maximum thrust of spray,

suitable for fogging. All models are portable products. Entire body is made of

Aluminium Alloy and internal components are made of S.S. & Engg. Plastic to resist

corrosion and chemical attack. The storage tank ranges from 6.5 Ltrs. (SS316L grade) To

7.5 Ltrs. (HDPE grade), sufficient enough to dispense chemical combinations in various

proportions. EASYFOG is thus an ideal unit for all fogging applications.

Applications

Aerial disinfection of enclosed areas like hospital O.T.s & I.C.U.s, General treatment for

Pest / Germ control, Disinfection of microbial germs at Pharma Labs & R&D Centres,

Odour control at various process units, At Storage houses etc.

Technical Specifications:

Timer Device : Electronic Timer - Adjustable (5 ~ 60 minutes)

Design : Portable

Particle Size : 1 ~ 40+ Microns (Controllable from Dry fog ~ Wet fog)

Tank Capacity : 6.5 Ltrs. (SS316L grade / HDPE)

Power Input : 230VAC / 5 Hz, Single Phase

Liquid Flow Rate : 1~18 Ltrs./Hr.(Adjustable) Optional: 1~5 Ltrs./Hr.

(Adjustable)

Particle Throw : Visible upto 15 ~ 20 Fts. & more

Area Coverage : > 10000 cubic. fts. (Uniformly with ROTOSTAND)

Motor Speed : 20,000 RPM (approx.)

Dry Weight : 6 ~ 7 Kgs.

Packing Dimensions: 15 X 15 X 18 Inches

 

Digital Floculator

We provide Digital Floculator (Jar Tester) to our valued customers at reasonable prices.

Technical Specifications:

CAT. No.

Outer Dimension

No. of Paddles

Speed Display Common

Speed Range

Speed Accuracy

SSE -28/A

10”Dx24”htx32”w

4

Digital red led

5 to 150 RPM

±1 RPM

SSE -28/B

10”Dx24”htx48”w

6

Digital red led

5 to 150 RPM

±1 RPM

SSE -28/C

10”Dx24”htx32”w

4

Individual speed control with common digital indicator

5 to 150 RPM

±1 RPM

SSE -28/D

10”Dx24”htx48”w

6

Individual speed control with common digital indicator

5 to150 RPM

±1 RPM

Digital Turbidity Meter

In order to meet the demands of our clients effectively, we bring forth Digital Turbidity Meter. These products are developed with utmost prominence by making use of quality tested stainless and other products under the supervision of efficient team members.

 

Features:

 

  • High durability
  • High performance
  • Precise design
  • Low maintenance
  • Easy to use

 

Specifications:

 

  • 3 1/2 digit LED display
  • Reliable & accurate results
  • Sewage & drinking water testing
  • Measurement upto 1000 JTU

Digital Colony Counter

    Features:

    • This unit is most useful for accurate counting and recording of bacterial and colonies
    • Usable in all laboratories – biology, pathology, zoology, bacteriology etc.
    • Housing made of M.S / G.I sheet finished with epoxy powder coated shade – regular Model
    • Body made of 316 S.S matt finish in GMP Model
    • 4 digit resettable digital display to read and record counting
    • Illumination provided by cool tube light for clear view and perfect counting through magnifying glass provided
    • A probe (PEN) for marking as well as counting provided
    • With wolffhueged grid glass plate and a magnifying lens
    • Operates on 230 volts A.C.

    Technical Specifications:

    Cat. NO.

    Size

    Magnifier

    Counter

    SSE -52/A

    10”X12”X6”

    4”Dia

    Maximum count 9999

    Portable Automatic Tabletop Autoclave

      Features:

      • Automatic Tabletop Autoclave (Portable)
      • Reliable, convenient method of steam sterilization
      • Sterilizing cycle terminal venting and drying cycle are automatically controlled by 0 to 60 minute digital timer
      • High grade 304 stainless steel chamber and exterior epoxy powder coated finish
      • Audible and visual alarms indicated sterilization cycle interruption
      • Control panel includes pressure gauge, digital temp. Indicator
      • A low water cut- off protects heating elements

      Technical Specifications:

      Cat. No.

      Working size

      Rack size

      Load

      SSE -50/A

      10” Dia x 12” Depth

      9” Dia x 8” Depth

      2.0 k.w.

      Laboratory Hot Plate Round

      We are involved in offering our valued clients with Laboratory Hot Plate (Round). The offered systems are developed using superior quality raw materials and high-grade steel and latest technology in line with the defined parameters of the industry. These products are highly durable and efficient. The product is based on modular rack base design which helps in improve its efficiency and easy to operate. Our products are quality checked to ensure perfect finish on delivery.

       

      Features:

       

      • Highly detailed
      • Precise design
      • High durability
      • Compact shape
      • Non-corrosive

       

      Specifications:

       

      • Round shape plate
      • Top plate over hangs by supporting m.s. pillars witch ensures air insulation between plate and control compartment keeping control compartment cool
      • Body made of thick mild steel /G.I. sheet duly finished in epoxy power coated shade in regular MODEL
      • Body made of stainless – steel & plate also made of S.S in GMP MODEL
      • With energy regulator and three heat control switch
      • Max. Surface temperature: - 300c
      • Operates on 230 volts A.C


      Technical Specifications:

      CAT. NO.

       

      Size Of Plate

      Watts

      SSE -10/A

      8” dia

      1.0 k.w.

      SSE -10/B

      9” dia

      1.5 k.w.

      SSE -10/C

      12” dia

      2.0 k.w.

      Slide Warming Drying & Embedding Table

      We are bring forth superior quality Slide Warming Drying & Embedding Table for our valued clients. These tables are manufactured and designed using high-grade corrugated material and advanced technology.

      Features:

      • Long service life
      • High performance
      • Low maintenance
      • Easy to operate

      Specifications:

      • Ideal for drying slides and melting of paraffin
      • Consisting of 2 sections - A heating zone of 12” X 4” and cold zone of 4”X 4”
      • Base and lid made of M.S/G.I with epoxy powder coated shade
      • A mica covered heater provides uniform heating throughout heating zone
      • Selection of temperature control energy regulator or solid state digital controller
      • Operates on 230 volts A.C


      Technical Specifications:

      Cat. No.

      Size testing zone

      Temp. Controller

      Watts

      SSE -30/ A

      17” LX 4”W

      Energy regulator

      200

      SSE -30/ B

      17”LX 4”W

      Solid digital controller

      200

      Weight Box

      Backed by diligent professionals, we have been able to offer our esteemed clients superior quality Weight Box. These products are manufactured by making optimum use of high-grade steel and other basic material, procured from the most reliable vendors of the markets industry. Designed to impeccability, these products comply with the defined parameters of the industry.

       

      Features:

       

      • Durable
      • Effective
      • Accurate design
      • Sturdy construction
      • Precise dimension

      Digital Motorless Magnetic Stirrer

      We put forth impeccable Digital Motorless Multi Magnetic Stirrer for our esteemed customers.Manufactured and designed with qualitative stainless steel and other required material, these products are in compliance with the defined parameters.

       

      Features:

       

      • Long service life
      • High performance
      • Low maintenance
      • Easy to operate
      • Accurate results

       

      Specifications:

       

      • Specially designed fully solid state magnetic stirrer with no moving parts
      • Steeples control provides unloaded speeds from 200 RPM to 1000 RPM
      • Easy reset for resetting the PTFE paddle in case of slip
      • Centering marks provided for positioning of vessels
      • Common digital display for RPM with selector switch
      • Choice of six place or twelve place 500ml vessels


      Technical Specifications:

        Cat. No.

        Model stage

        Speed Indication

        Speed Controller

        SSE-46/A

        6 plate

        Digital

        Single

        SSE-46/B

        12plate

        Digital

        Single

        SSE-46/C

        6 plate

        Digital

        Individual

        SSE-46/D

        12 plate

        digital

        individual

        Digital Spectrophotometer

        We are offering Digital Spectrophotometer with utmost quality. These products are designed and developed in line with the prevailing trends and parameters under the supervision of our team members. We ensure to design these products adopting advanced technology in accordance with the defined parameters of the industry and clients requirements. Furthermore, to cater to the requirements of our valued clients, we offer these products in different specifications.

         

        Features:

         

        • Long lasting
        • High performance
        • Low maintenance
        • Compact design
        • Fine-finish

        Digital Melting Point Apparatus

        With the support of our team, we have been able to hold expertise in developing best-in-class Digital Melting Point Apparatus. Our team develops and designs these products with utmost precision in compliance with the international quality standards. Our team of professionals are highly qualified to develop these products in line with the defined parameters of the industry and clients requirements.

         

        Features:

         

        • Easy to operate
        • Low maintenance
        • Precise designed
        • Long lasting
        • High performance

        Nichrome Corks

        We bring forth the best Nichrome Corks for our esteemed clients. Manufactured and designed with steel and other components, these products are highly durable and effective. Furthermore, we ensure to deign these corks adopting advanced technology in accordance with the defined parameters of the industry and clients requirements.

         

        Features:

         

        • Precise design
        • Low maintenance
        • High durability
        • Precise design
        • Non-corrosive

         

        Lab Viscometer

        We are engaged in offering the best-in-class Lab Viscometer. Manufactured by making use of qualitative required stainless steel and other components, these products conform to the established quality parameters of the industry. To cater to the diversified demands of the clients, we offer these chains in different specifications.

        Features:

        • Low maintenance
        • High durability
        • Precise design
        • Effective

        Specifications:

        • Different viscosity range for measuring the relative consistency during the manufacture and use of point’s varnishes


        Technical Specifications:

        Type

        Viscosity Range (Approx)

        Use For

        B-2

        Up to 0.5 stock

        Spirit Lacquers

        B-3

        0.5-1.2

        Heavy Liquids

        B-4

        0.5-2.5

        Heavy Liquids

        B-5

        1.5-5.0

        Heavy Liquids

        Digital COD Reactor

        Product Details:
        • Brand: as per requirement
        • Condition: New
        • Customized: Yes
        • Product Type: as per requirement

        Backed by a team of professionals, we have been able to provide our esteemed customers with Digital COD Reactor. Our products are manufactures using superior raw material offered by the finest vendors in the industry. These products are conceptualize and designed keeping in mind the prevailing market trends and industry laid parameters.

         

        Features:

         

        • High performance
        • Precise design
        • Compact shape
        • High durability

         

        Specifications:

         

        • Selection of model – 15- tubes or 24 specially designed COD digester for COD method for monitoring waste water influent and industrial process water
        • Highly insulated double walled inner chamber of 304 S.S & exterior G.I powder coated finish
        • The temperature is being control by solid state electronic temp. controller with DIGITAL indicator & pt-100 as a sensor
        • Digital timer of 120 minute with alarm
        • tubes or 36 tubes
        • Suitable for 38 mm dia tubes and 600 mm height air condenser
        • Temp: accuracy: ±0.5c


        Technical Specifications:

          Cat. NO.

          Block Size (LXWXD)

          Glass Tube Size

          Rating

          SSE-32/A

          12”Lx7”Wx6”D

          38MM Dia

          5 X3 Row

          800 WATTS

          SSE-32/B

          14”Lx9”Wx6”D

          38 MM Dia

          6 X4 Row

          1500 WATTS

          SSE-32/C

          19” Lx9”Wx6”D

          38 MM Dia

          9 X4 Row

          2400 WATTS

          Horizontal High Pressure Autoclave

          Laminar Flow Benches

          Vertical Laminar Airflow Cabinet

          Rotary Shaking Machine

          Our expertise lies in manufacturing and designing best-in-class Rotary Shaking Machine. We develop these machines while taking into consideration prevailing markets demands and industry laid parameters. Manufactured using superior quality basic material and components, these products are highly demanded in the market.

          Features:

          • High durability
          • Low maintenance
          • Sturdy construction
          • Compact design

          Specifications:

          • Continues duty and variable speed single double or 3 tier platform unit
          • For rotary swirling agitation used extensively in tissue culture work aeration of formations and other chemical mixing procedures
          • D.C motor driver the shaker mechanism through mechanical transmission utilizing a variable fully system with v belt drive
          • Speed is variable through the speed range, however at a given setting, speed is stable
          • Speed can be adjustable from 10 to 250 RPM with digital speed

          Technical Specifications:

          Cat. NO.

          Plate Form Size

          No. Of Tier (Platform)

          Carrier

          SSE-53/A

          22”X22”

          Single

          16 nos X 500 ml flask

          SSE-53/B

          22”X22”

          Double

          32 nos X 500 ml flask

          SSE-53/C

          22”X22”

          Three

          48 nos X 500 ml flask

          SSE-53/D

          36”X36”

          Single

          16 nos X 500 ml flask

          9 nos X 1000 ml

          SSE-53/E

          36”X36”

          Double

          32 nos X 500 ml

          18 nos X 1000 ml

          SSE-53/F

          60”X60”

          Single

          20 nos X 1000 ml

          12 nos X 2000 ml

          SSE-53/G

          60”X60”

          Double

          40 nos X 1000 ml

          24 nos X 2000 ml

          Digital PH Meter

            Features:

            • Affordable, rugged portable meter for routine PH measurements
            • Easy to read RED” LED” display – 3 ½ digit.
            • Range: PH 0.000 to 14.00 ph mv: 0 to 1999 mv
            • Solid ±0.01 PH readability and MV readability and MV readability 1 MV
            • Temp. compensation: manually, adjustable setting on calibrated dial between 1c to 100c
            • Auto mode compensation in ATC model
            • Input impedance: 10/12 ohm

            Technical Specifications:

            Cat. NO.

            Model

            Slope Adjustment

            Temp. Compensation

            SSE-47/8

            Regular

            80 to 120% at 25c

            Manual mode

            Compensation

            SSE-47/B

            ATC

            80 to 120% at 25c

            compensation

            Auto mode or manual

            Mode compensation

            Lab Ultrasonic Bath

            We manufacture SSGW brand Ultra Sonic Bath

            Features:

            Ø  Continuous Self Tuning Circuitry For any change in Workload, Liquid level and Bath Temp

            Ø  Uniform Cavitations through out the tank

            Ø  Separate Oscillator Eliminates Damage to Generator in Case of Failure of Transducers

            Ø  Using 40 Khz Frequency For Effective Cleaning with Low Noise

            Ø  Designed for Complete Cleaning of Small and large components without Dismantling

            Ø  Inner tank and outer body made of Stainless Steel

            Effective Removes:

            Dust, Dirt, Rust, Greece, Wax, Flux etc

            Karl Fischer Titremeter

            We offer Karl Fischer Titremeter that is versatile, compact, rugged & easy to operate instrument to determine moisture contents in liquids & powders. It has auto titration control, auto zero burette, adjustable timer, visual & audible alarm. It display array of 10 led's in line. It indicated run add end display in auto mode. It detct current sensing by electronic control. It has highly sensitive solenoid control valve for automatic control of k. F. Reagent. Its various accessories are burette (clear glass) 10 ml, reservoir bottle 500 ml, rubber bellow for pumping air, titration cell 200 ml, dual platinum electrode, PTFE coated magnetic stirring capsule, nozzle, moisture trap with rubber tubing.

            MS Laboratory Jacks

            Laboratory Jacks made from MS/Aluminium/SS plate with steel operating screw. A plastic knob operates the scissor action lifting mechanism. Either plate can be used as base.

            Vacuum Pump

            We offer Vacuum Pump that has required no lubrication. It has noiseless performance, absolutely portable, totally oil-free construction, practically maintenance free. Its all parts are made from special graded aluminum die cast material for light weight and good strength. Its diaphragms are made of special 2-ply nylon reinforced neoprene rubber. Its value made of ss 316 material built in micro suction filter. It has extra large bearings for trouble free and smooth running. Pumps available with single as well as 3-phase motors.

            Digital Colony Counter

            We offer Digital Colony Counter that is designed for quick and accurate counting of bacterial and mold colonies in petri dishes. Feature packed & easy to use, this is an indispensable bench top tool for the busy microbiologist. It is designed for rapid and accurate counting of bacterial and mold colonies. Simply place the pertri dish on the illuminated pad and touch the dish with the pen provided to mark each colony in turn. This causes a count to be registered on the digital display and audible tone confirms each count made. Marking the dish with the pen avoids missing colonies or double counting. The digital count on the display can be reset manually any time by pressing the reset key provided. Optimum viewing of colonies is aided by peripheral glare-free illumination. An integral magnifying glass provides for easier counting of small colonies.

            Flame Photometer

            We offer Flame Photometer that is rugged, reliable & accurate instrument to determine concentration of Na, K, Li & Ca Solution in clinical lab & soil laboratories.

            Features:

            • Simple & easy to operate
            • Narrow band interference Filters
            • Dual Channel display
            • Na & K at single Aspiration

            Flexible Heating Mantles

              Features:

              • Dual purpose heating mantel equally suited for either bench or suspended operation
              • Made fro fiber glass hand- knitted yarn
              • Filled with glass wool insulation between inner and outer fiber netting wall
              • Inner metal ring provided a firm support for flask
              • With separate energy regulator box
              • Operates on 230 volts

              Technical specifications:

              Cat. No.

              Size flask capacity

              Rating

              SSE -29/A

              500 ML Cap

              200 Watts

              SSE -29/B

              1000 ML Cap

              300 Watts

              SSE -29/C

              2000 ML Cap

              450 Watts

              SSE -29/D

              3000 ML Cap

              450 Watts

              SSE -29/E

              5000 ML Cap

              600 Watts

              Heating Mantle

              Features:

              • A aluminum housing non rusting
              • Epoxy powder coated finish
              • Thick hand knitted fiber glass netting
              • High quality insulation
              • Energy regulator power controller
              • Maximum surface temperature 350c
              • Booster heaters in bigger sizes
              • Usable with round bottom flask

              Technical Specifications:
              Cat. No. Flask capacityWatts CircuitsVolts
              SSGW-A/150 ml601230
              SSGW-A/2100 ml601230
              SSGW-A/3250 ml1501230
              SSGW-A/4500 ml2001230
              SSGW-A/51 Litre3001230

              Rota Mantle

              Features:

              • The unit is a combination of heating mantle and magnetic stirrer
              • A robust aluminum housing for heating mantle having powder coated finish and S.S housing for stirring compartment
              • Selection of temperature controller energy regulator OR solid state digital temp. controller
              • Solid state analogue speed controller
              • Hand knitted – fiber glass heating surface with high resistance nichrome elements
              • A PTFE coated magnetic bar to perform the stirring


              Technical Specifications:

              Cat. No.

              Flask Capacity

              Watts

              Speed RPM

              SSE -54/A

              250 ml Cap

              200

              1200

              SSE -54/B

              500 ml Cap

              200

              1200

              SSE -54/C

              1 Lt. Cap

              300

              1200

              SSE -54/D

              2 Lt. Cap

              450

              1200

              SSE -54/E

              3 Lt. Cap

              450

              1200

              SSE -54/F

              5 Lt. Cap

              600

              1200

              SSE -54/G

              10 Lt. Cap

              1000

              800

              SSE -54/H

              20 Lt. Cap

              2000

              800

              Ultra Violet Viewing Cabinet

              Features:

              • Usable for viewing paper and thin layer chromatograms
              • G.I epoxy powder coated cabinet in regular Model
              • 316L S.S cabinet with matt finish in GMP Model
              • With enclosed long and short wave light sources
              • Provides an enclosed viewing space which eliminates external light interference
              • Cabinet features a special filter that absorbs UV energy before it reaches your eyes “optional”
              • Use with ultra violet lamp for observing fluorescent effect on chronograms etc.
              • Operates on 230 volts A/C

              Technical Specifications:

              Cat. NO.

              Model

              SSE -48/A

              Single wave length

              SSE -48/B

              Double wave length

              Laboratory Hot Plate Rectangular

              Features:

              • Plates are in rectangular shape
              • Top plate over hangs by supporting M.S. pillars allows air insulation between plate and control compartment to keep control compartment cool
              • Long lasting nichrom elements
              • Body made of thick mild steel/G.I sheet duly finishing in epoxy power  coated shade in Regular Model
              • Body made of stainless - steel & plate also made of S.S in GMP Model
              • With energy regulator and three heat control switch
              • Max. Surface temperature : 300c
              • Operates – on 230 volts A.C

              Technical Specifications:

              CAT. NO.

              Size of Plate

              Watts

              SSE -11/A

              10” W X16”L

              1.0 K.W.

              SSE -11/B

              12”W X18”L

              2.0 K.W.

              SSE -11/C

              18” WX24”L

              3.0 K.W.

              Lab Manometer

              We have wide range of Lab Manometer. These are used to measure atmospheric pressure. Owing to their modern and user friendly features, these are widely used in various schools, colleges, laboratories and other places.

              Vacuum Oil Pump

              A direct drive pump is driven at a high rotational speed of 1400RPM. Oil is pumped into the mechanism by a simple oil pump via the distributor and anti-suck back valve (non-return valve). Motor, end bearing and external shaft seal are lubricated by filtered oil from the oil pump. Oil for the high vacuum stage is degased in the centre bearing between the two stages. Pump's motoe is cooled by its own blower. To work on 220/230 volts AC supply.

              Digital Melting Point Apparatus

              Tablet Hardness Tester

              Features:

              • Specially designed handy instrument for taking quick reading for hardness of hardness tablets
              • The unit made of gunmetal casting duly finished in chrome plating
              • The scale of 0 to 20 kg. per square cm with each division for 1 kg

              Portable Tablet Hardness Tester (Digital)

              Portable Tablet Hardness Tester

              Features:

              Ø  Hardness measurement by load cell up to 500 Newtons / 50 kgf

              Ø  Units of measurement in N, kgf and lbf

              Ø  PC connectivity / Printer Connectivity through RS232 port

              Ø  Programmable upper (T1) and lower (T2) tolerance limits

              Ø  Peak Hold and Auto Release Function

              Ø  Green and Red Light Indication for better understanding

              Ø  Memory of upto 10 testing data

              Ø  Automated semi-calibration (zero-point adjustment)

              Ø  Display of 10 test value and calculate the average of the memorized value.

              Ø  LCD Display with back light

              Ø  Interchangeable Display Direction for better view

              Ø  Automatic Power Off Function

              Ø  Acrylic glass safety cover with disposal container

              Ø  Tester operates on rechargeable battery

               

              Specifications:

              Hardness range – 2N to 500N

              Resolution - 0.001N to 0.1N (Depending on capacity)

              Accuracy - ± 0.5%

              Tablet Range - 2 ~ 28 mm

              Display - LCD with Backlight

              Interface - RS-232 

              Dynamic Pass Box

              Dynamic Pass Box designed to allow material transfer through controlled environment withoutmuch personnel movement to minimize man /material movement & avoid cross contaminationbetween different classified areas. It aids to achieve desired classification & controls ingress ofparticulate contaminants into clean room & between different classified areas.Material of Construction:SS 304 and (Except Filters and motor-blower assemblies which will be in standard execution)Standard details: SS double walled doors with flush glass view panels with SS handles, SS hinges etc. Electro-Magnetic Interlocking arrangement to ensure that only one side door can beopened at a time. SS Indicators and Emergency switches on either side for door open condition SS Door Release SwitchMaterial Details:Minipleat HEPA Filter: These filters are water resistant, fire retardant, imported micro fineglass fiber media; EU - 14 Grade, having an efficiency rating better than 99.999% for 0.3 μ. Thesefilters are designed to accommodate higher airflow volume.Prefilter: These filters are Non-Woven Synthetic with HDPE mesh and Al expanded mesh onair leaving side; EU 5 Grade 5:, with efficiency of 95% down to 5 micron. These filters arewashable.Blower: Statically and dynamically balanced blower with be coupled with ISI marked motor forbetter performance and better life of filters, it will be fixed with help of suspension springs.Magnehelic Gauge: Differential Pressure Gauge (0 – 25 mm: 1 No.) SS ON/OFF Switches. DOP Test port at upstream of HEPA filter. SS 304Performance: Air cleanliness : ISO Class 5 (ISO 14644-1:1999 (E)) / Class 100 (U.S. FED STD 209 E) Air Velocities : 0.45 ± 0.05 mps Air Flow : Vertical Noise Level : Less than 65 dB Vibration Level : MinimumPerformance Tests (Optional): HEPA Filter Integrity Test Particle Count Test Air Velocity Measurement TestDocumentation (Optional): Design details Installation Operation & Maintenance Manual Construction & electrical wiring drawing

              Automatic Water Distillation Equipment (Cabinet Model)

              Automatic Water Distillation Equipment (Cabinet Model)

              Compact & User Friendly:

              This is a fully automatic water distillation equipment and can be used in research laboratories, hospital etc. It is manufacturer from 303 exp borosilicate glass or quartz glass. The distillation has following features:

              ü Replaceable Silica Sheathed (Quartz) Heater: The horizontal jacket is fitted with removable silica sheathed heater and screw threaded connectors for ease of cleaning.

              ü Distillate temperature is approx. between 25°C to 45°C which is ensured by an efficient condenser.

              ü The stand is powder coated for rust free operation and lustrous appearance.

              ü Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy.

              ü Screw Threaded Connectors: These are provided for easy plumbing & installation to avoid any glassware breakage during assembly.

              ü Fuse is provided for safety in case of voltage fluctuation or short circuit.

              ü Boiler is provided with Replaceable Constant Level Device for easy draining and cleaning of boiling chamber.

              ü The front cover is easily removable making the access to the glass parts very easy.

              ü Electrical Power: 220/240V, 50/60 Hz, Single Phase supply

              Technical Specifications:

              Borosilicate glass

              Output Cap. (approx)

              2 Ltr/hr

              2 Ltr/hr

              4 Ltr/hr

              4 Ltr/hr

              Stage

              Single Stage

              Double Stage

              Single Stage

              Double Sage

              Distillate Quantity

              Distillate Quantity

              Pyrogen Free

              Pyrogen Free

              Pyrogen Free

              Pyrogen Free

              Conductivity µS/cm

              1.0 – 2.0

              0.8 – 1.0

              1.0 – 2.0

              0.8 -1.0

              Cooling water Requirement (approx.)

              1.5 Ltr/min

              2 Ltr/min

              2-3 Ltr/min

              2-4 Ltr/min

              Power Rating (Total)

              1.5 KW

              3.0 KW

              3.0 KW

              6.0 KW

              ** All the parameters are under Standard Test Conditions.

              ** Output quality would depend upon the quality of inlet feed water.

              Mortuary Chamber

              With vast experience and knowledge we are involved in offering an extensive range of Mortuary Chamber. These are highly reckoned among our clients due to their fine quality, high durability and long life. These are manufactured using fine quality material as per the set industrial standards. Moreover, we also assure to deliver a defect free range of our products in a fixed time frame.

              Features:

               

              • Cost effective
              • Quality approved
              • Fine finish
              Looking for Laboratory Equipment ?
              © Shamboo Scientific Glass Works
              Desktop Site Back to top